discharge 1-3mm produacts 75* 50 High Pressure Grinding Roll

1.The hydraulic system 2.hard alloy studs surface 3.High efficiency 4.Onsite after sale service

Packaging & Delivery

Package: Large part is non-packed, small part is in wood case.

Delivery: 20 days

Port: Shanghai, Ningbo, Guangzhou

Introduction:

High pressure roller grinding machine has simple structure and reliable performance. Its high pressure can grind material to fine, superfine products with the fineness modulus under control. Our company specially considered the needs for shattering rigid material in design, so the grinding machine has higher crushing capacity compared with other high pressure roller grinding machines. It is applicable to crushing material with medium and high hardness and pressure strength of lower than 250Mpa and humidity of lower than 10%, such as cobbles, coke, coal, ceramics, quartz, limestone, muddy shale, chalkstone, gypsum, edible salt and chemical material. This machine is characterized by low maintenance cost, large crushing ratio, reliable performance, small vibration, and less dust and low noise.

High pressure roller grinding machine can be used to moderately crush single-component material with high or medium density, like ore, rock and industrial slag in a wide variety of fields, such as ore dressing, electricity, chemical industry, cement, fire retardant material, grinding material and construction. In particular, it can be used to produce melon stone, coal and coal gangue in building material and electricity industry with better results than normal high pressure roller grinder. It can also be used for crushing steel grit.

Characteristics:

The hydraulic systemhard alloy studs surfaceHigh efficiencyOnsite after sale service

Working Principles:

The roller crushing machine has two rollers rotating in the opposite position. Brittle material is sent to a weighing hopper with weighting sensor by a transference mechanism and passes through the feeding mechanism until it enters into a place between two rollers of the same sizes standing in the opposite position. The side of the roller draws the material into the roller crevice with high pressure in between, which compresses the material into compact cake-like product that drops down. The product is then moved out at the hopper by the transference mechanism, and will be separated or ground in the following process.

Technical Parameter:

Model	Power KW	Feeding Size MM	Sand Percentages <5mm	Throughput T/H	Voltage
DHL G75*27	2*75	25	50%-70%	60-90	380V
DHL G75*50	2*200	25	50%-70%	100-160	380V
DHL G120*450	2*280	30	50%-70%	110-170	380V
DHL G140*50	2*315	40	50%-70%	155-230	380V
DHL G140*650	2*500	40	50%-70%	230-320	6KV-10KV
DHL G140*800	2*560	40	50%-70%	270-360	6KV-10KV
DHL G170*100	2*800	50	50%-70%	380-500	6KV-10KV
DHL G200*120	2*1600	60	50%-70%	840-1520	6KV-10KV

Dahongli Anywhere:

Thanks to our good quality and post sale service, we have spread our Dahongli Machinery to all over the world

 

More questions:

 

If you still have any questions, please feel free to contact with our online service, or our international business department. +86-28-88208058